Sherwin Williams Premium Wall and Wood Primer Review
Sherwin Williams Wall and Wood Shows Why Primer Still Rules
Many interior repaint jobs or do information technology yourself room makeovers tin can be done with no primer at all. About pros would agree that paint manufacturers are putting out their top lines of paint with loftier enough quality ingredients these days to perform most functions required in repaint piece of work, generally without much need for primer. Fifty-fifty if you are dramatically changing wall and trim colors, yous probably don't need to prime number for coverage. Practiced paints can exercise that present. It is in the loonshit of building new finishes on ceilings, walls, trim packages, windows, doors and cabinetry that laying the initial primer foundation is critical to long term operation and aesthetic endurance. And in our opinion, Sherwin Williams Wall and Wood is amongst the leaders of the class for priming raw surfaces.
Do Primers Even Do Anything?
Primers are formulated with binders that facilitate their adhesion to surfaces. While there are paints on the market place that tin stick to wood at an acceptable do it yourself, commercial or tract dwelling house cease standard, well-nigh professional wood finishers prefer that the outset product put on their surfaces is designed to perform at a high level, and with no identity crisis.
Primers are congenital to stick to surfaces and encourage paints to stick to them…to be that disquisitional link between substrate (woods) and pigment. There are one can paint/primer products for situations when a lower standard is acceptable, or where just one tin of product is preferred for convenience. We believe that our customers pay far too much for the features (trim, cabinets, doors, windows) in their homes for us to compromise on the initial pigment task. You lot simply go one chance to prime number raw substrates.
Nosotros have been testing many waterborne primer options for the by few years, and they all come with strengths and weaknesses. 1 paint manufacturer exec told me years ago that every can of paint is a can of trade offs. If a formulation is tweaked in one expanse, there is a ripple outcome in other areas. It is difficult for 1 can of paint or primer to excel in ALL categories.
Benefits of Sherwin Williams Wall & Forest:
- brushes, rolls and sprays exceptionally well
- dries fast (mfr says ii hours to sand, nosotros accept observed less)
- dries flat (no hint of sheen)
- ability sands and hand sands powdery smooth, doesn't dodder, pill or load abrasives much
- can be sanded intensively without edge burn or face punch through
- can get shine and retain 'tooth' for topcoat adhesion
Downside:
- can be annoying on sprayer tips, resulting in premature wear
- doesn't excel in hiding extreme wood grain bleed (maple, cedar/redwoods)/bad organic stains
- interior use only (non an all purpose int/ext product)
- viscosity/quick dry characteristics can claiming non-pro users in brush application just is forgiving of overlaps
Nosotros have used Wall & Wood extensively in combination with SW Cashmere and BM (314) Satin Impervo on several wood species, chiffonier grade sheet goods and mdf panels with exceptional results in the context of interior trim packages. Wall & Forest with only ane finish coat on top (past whatever application method) exceeds results nosotros have observed with self priming paints in a two glaze system without primer.
Are three Coat Systems Obsolete?
The primer question boils down to whether a two glaze arrangement is sufficient or not. The answer in many cases tin can be yes, and it is best accomplished with a primer and a paint working together, rather than one tin can of paint trying to do the jobs of primer and pigment at a high level. In a traditional primer and paint scenario (with proper product selection, prep and application), a 3rd coat is rarely necessary for coverage. It is just an opportunity to create a higher level finish by sanding to a finer dust and building that hard/soft sheen that the best trim paints take always had. When the primer has done its job, it makes the job of the paint (and painter) easier. Two coats versus three is a uncomplicated matter of preference. If you are shooting for a ii coat result on either new trim or repaint with radical color alter, Wall and Forest is a very efficient pick, given its trunk, dry time and coverage characteristics.
Lesser Line:
Despite the product name, we consider this to be a wood primer, and not a wall primer – unless the walls are made of woods. Retailing at about $40/gal, at that place are more than cost effective options for the volume of fabric used in wall priming. However, for some trim repaint and well-nigh new trim finish applications it makes our curt listing every bit a foundational product in two and three coat finish systems that do non fail. This primer tin can be a critical component in high stop finish systems that run across the aesthetic and performance expectations of customers with high standards. Over the by 3 years, this primer has quickly evolved into ane that we purchase regularly for our most critical paint projects. If yous endeavor it, lay it on heavy and sand it well.
(disclaimer: no materials were supplied to us for the compilation of this review, it is singularly based on our feel as pigment contractors and paying consumers of the product).
Here are some of our tips and criteria for those who are researching waterborne primer options. If you accept used SW Premium Wall & Forest primer, or are because doing then, please get out comments and questions below.
Source: https://topcoatreview.com/2012/06/sherwin-williams-wall-and-wood/
Post a Comment for "Sherwin Williams Premium Wall and Wood Primer Review"